Netopia Router PN Series - Manual (Page 185)

Monitoring Tools 9-3
Current Status
The current status section is a table showing the current status of
ISDN, the WAN, or Frame Relay.
Current ISDN Connection or WAN Status
ISDN only
Current ISDN Connection Status
---Profile Name------State---%Use-Remote Address----Est.-More Info----------
ISP CH1 10 IP 92.163.4.1 Lcl NAT 192.163.100.6
Leased line with PPP or
HDLC enabled only
Current WAN Status
---Profile Name------State---%Use-Remote Address----Est.-More Info----------
ISP CH1 10 IP 92.163.4.1 Lcl NAT 192.163.100.6
Profile Name: Lists the name of the connection profile being used,
if any. This field will also indicate if the B-channel is in use for a
POTS call.
State: Lists the channels in use for this connection.
%Use: Indicates the average percent utilization of the maximum
capacity of the channels in use for the connection.
Remote Address: Shows the IP address of the connected remote
network if the connection is using IP. Otherwise, shows the IPX
address of the connected remote network, if using IPX. For ISDN
POTS calls, it shows the called DN if locally originated, otherwise
the calling DN (if available).
Est: Indicates whether the connection was locally or remotely
established.
More Info: Indicates, in order of priority, the NAT address in use for
this connection, the IPX address in use (if IP is also in use), or the
ISDN caller identification (if available).