Viewing aurp partners, Adding an aurp partner – Netopia Router PN Series User Manual
Page 137
AppleTalk Setup
6-13
■
To activate AURP and enable connections to and from AURP
partners, select AURP Enable and toggle it to On.
Viewing AURP partners
■
To see a table of existing AURP partners, select Display/Show
Partners and press Return.
Note: The Netopia Router can define a total of 32 AURP
partners.
Adding an AURP partner
■
To add a new AURP partner, select Add Partner and press
Return to go to the Add AURP Partner screen.
Add AURP Partner
Partner IP Address or Domain Name:
Initiate Connection: No
Restrict to Free Trade Zone: No
ADD PARTNER NOW CANCEL
Enter Information about new Partner.
■
Select Partner IP Address or Domain Name and enter the new
AURP partner’s IP address. If you do not know the remote
network’s IP address, enter its domain name. Domain names
are the Internet addresses favored by people (for example,
chagall.arts.edu). Domain names are matched to the IP
addresses actually used by IP routers (for example,
163.7.8.202).