Netopia Router PN Series - Manual (Page 31)

Configuring ISDN and Leased Line Connections 2-15
Connection Profiles
+-Profile Name---------------------IP Address----IPX Network-+
+------------------------------------------------------------+
| Easy Setup Profile 127.0.0.2 0 |
| Panost Inc. 0.0.0.0 |
| XYZ Corporation 0.0.0.0 |
+------------------------------------------------------------+
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.
Changing a Connection Profile
To modify a connection profile, select Display/Change Connection
Profile in the Connection Profiles screen to display a table of
connection profiles.
Select a connection profile from the table and press Return to go to
the Change Connection Profile screen. The parameters in this
screen are the same as the parameters found in the Add
Connection Profile screen. To find out how to set them, see “Adding
a connection profile” on
page 2-16 .
Change Connection Profile
Profile Name: Panost Inc.
Profile Enabled: Yes
IP Enabled: Yes
IP Profile Parameters...
IPX Enabled: Yes
IPX Profile Parameters..
Data Link Encapsulation... PPP
Data Link Options...
Telco Options...
Modify Connection Profile here. Changes are immediate.