Netopia Router PN Series User Manual
Page 43
Configuring ISDN and Leased Line Connections
2-27
telephone number for a multilink call. In addition, the Netopia
Router can bring WAN links up and down with a remote router.
Note: There are two specifications for BAP protocol. The first
specification was proposed before January 1997 and the latter
was proposed after that date.
The On-Old IDs selection refers to the earlier BAP proposal and
On-New IDs refer to the new proposal.
Because there is no set standard at this time for BAP protocol
the Netopia Router allows you to select either specification.
Models with Frame Relay
enabled only
9.
Select Data Link Options and press Return. The Frame Relay
Parameters screen appears.
Frame Relay Parameters
Auto-Detect DLCIs: Yes
Multicast DLCI Number: 0
Configure Frame Relay-specific parameters of your Connection Profile
here.
■
Select Auto-Detect DLCIs and toggle to either Yes or No. If you
select Yes, you are enabling your Frame Relay profile to
auto-detect the DLCIs associated with its network layer
attributes. This feature is also called SmartMatch. If you select
No, you will need to manually configure each DLCI in the DLCI
configuration table. See
“Frame Relay DLCI configuration” on
. The default setting for this option is Yes. Press
Return.
■
Select Multicast DLCI Number. In this field you may add a
number that will be used for multicasting in conjunction with the
network layer attributes of your given profile. The default setting
for this option is 0. If you choose to leave 0 as the value for this
field, the specific profile that you are configuring will not be
used for multicasting.