Nortel Networks ALTEON OS BMD00007 - Manual (Page 190)

Alteon OS Command Reference
192 „ The Configuration Menu BMD00007, November 2007
/cfg/sys/ntp
NTP Server Configuration
This menu enables you to synchronize the switch clock to a Network Time Protocol (NTP)
server. By default, this option is disabled.
[NTP Server Menu]
prisrv - Set primary NTP server address
secsrv - Set secondary NTP server address
intrval - Set NTP server resync interval
on - Turn NTP service ON
off - Turn NTP service OFF
cur - Display current NTP configuration
Table 6-8 NTP Configuration Menu Options (/cfg/sys/ntp)
Command Syntax and Usage
prisrv <NTP Server IP address>
Prompts for the IP addresses of the primary NTP server to which you want to synchronize the
switch clock.
secsrv <NTP Server IP address>
Prompts for the IP addresses of the secondary NTP server to which you want to synchronize the
switch clock.
intrval <resync interval in minutes>
Specifies the interval, that is, how often, in minutes (1-2880), to re-synchronize the switch clock
with the NTP server.
on
Enables the NTP synchronization service.
off
Disables the NTP synchronization service.
cur
Displays the current NTP service settings.