Nortel Networks ALTEON OS BMD00007 - Manual (Page 308)

Alteon OS Command Reference
310 „ The Configuration Menu BMD00007, November 2007
/cfg/qos/8021p
802.1p Configuration
This feature provides the capability to filter IP packets based on the 802.1p bits in the packet's
VLAN header. The 802.1p bits specify the priority that you should give to the packets while
forwarding them. The packets with a higher (non-zero) priority bits are given forwarding pref-
erence over packets with numerically lower priority bits value.
[802.1p Menu]
priq - Set priority to COS queue mapping
qweight - Set weight to a COS queue
numcos - Set number of COS queue
cur - Display current 802.1p configuration
Table 6-101 802.1p Menu Options (/cfg/qos/8021p)
Command Syntax and Usage
priq <0-7> <0-1>|<0-7>
Maps the 802.1p priority of to the Class of Service queue (COSq) priority. Enter the 802.1p prior-
ity value (0-7), followed by the Class of Service queue that handles the matching traffic.
qweight <0-1>|<0-7> <0-15>
Configures the weight of the selected Class of Service queue (COSq). Enter the queue
number, followed by the scheduling weight (0-15).
numcos 2|8
Sets the number of Class of Service queues for switch ports. The default value is 2.
cur
Displays the current 802.1p parameters.