Nortel Networks ALTEON OS BMD00007 - Manual (Page 287)

Alteon OS Command Reference
The Configuration Menu „ 289 BMD00007, November 2007
/cfg/l3/igmp/snoop/igmpv3
IGMP Version 3 Configuration
Table 6-85 describes the commands used to configure IGMP version 3.
ena
Enables IGMP Snooping.
dis
Disables IGMP Snooping.
cur
Displays the current IGMP Snooping parameters.
[IGMP V3 Snoop Menu]
sources - Set the number of sources to snoop in group record
v1v2 - Enable/disable snooping IGMPv1/v2 reports
exclude - Enable/disable snooping EXCLUDE mode reports
ena - Enable IGMPv3 Snooping
dis - Disable IGMPv3 Snooping
cur - Display current IGMP Snooping V3 configuration
Table 6-83 IGMP V3 Menu Options (/cfg/l3/igmp/snoop/igmpv3)
Command Syntax and Usage
sources <1-64>
Configures the maximum number of IGMP multicast sources to snoop from within the group
record. Use this command to limit the number of IGMP sources to provide more refined control.
v1v2 enable|disable
Enables or disables snooping on IGMP version 1 and version 2 reports. When disabled, the switch
drops IGMPv1 and IGMPv2 reports. The default value is enabled.
exclude enable|disable
Enables or disables snooping on IGMPv3 Exclude Reports. When disabled, the switch ignores
Exclude Reports. The default value is enabled.
ena
Enables IGMP version 3. The default value is disabled.
Table 6-82 IGMP Snoop Menu Options (/cfg/l3/igmp/snoop)
Command Syntax and Usage