Nortel Networks ALTEON OS BMD00007 - Manual (Page 213)

Alteon OS Command Reference
The Configuration Menu „ 215 BMD00007, November 2007
/cfg/port <port alias or number> gig
Port Link Configuration
Use these menu options to set port parameters for the port link.
N OTE – The speed and mode parameters are fixed for Gigabit Ethernet ports, and
cannot be configured.
Link menu options are described in Table 6-26 and appear on the gig port configuration menu
for the GbE Switch Module . Use this menu to set port parameters such as speed, flow control,
and negotiation mode for the port link.
[Gigabit Link Menu]
speed - Set link speed
mode - Set full or half duplex mode
fctl - Set flow control
auto - Set auto negotiation
cur - Display current gig link configuration
Table 6-26 Port Link Configuration Menu Options (/cfg/port/gig)
Command Syntax and Usage
speed 10|100|1000|any
Sets the link speed. Some options are not valid on all ports. The choices include:
„ 10 Mbps
„ 100 Mbps
„ 1000 Mbps
„ “Auto,” for auto negotiation
mode full|half|any
Sets the operating mode. The choices include:
„ “Any,” for auto negotiation (default)
„ Full-duplex
„ Half-duplex
fctl rx|tx|both|none
Sets the flow control. The choices include:
„ Receive flow control
„ Transmit flow control
„ Both receive and transmit flow control (default)
„ No flow control
auto on|off
Enables or disables auto negotiation for the port.