Nortel Networks ALTEON OS BMD00007 - Manual (Page 248)

Alteon OS Command Reference
250 „ The Configuration Menu BMD00007, November 2007
/cfg/l2/vlan/pvlan <protocol number>
Protocol-based VLAN Configuration
Use this menu to configure Protocol-based VLAN (PVLAN) for the selected VLAN.
[VLAN 1 Protocol 1 Menu]
pty - Set protocol type
prio - Set priority to protocol
add - Add port to PVLAN
rem - Remove port from PVLAN
ports - Add/Remove a list of ports to/from PVLAN
tagpvl - Enable/Disable port tagging for PVLAN
taglist - Enable tagging a port list for PVLAN
ena - Enable protocol
dis - Disable protocol
del - Delete protocol
cur - Display current PVLAN configuration
Table 6-53 PVLAN Menu Options (/cfg/l2/vlan/pvlan)
Command Syntax and Usage
pty <(Ether2|SNAP|LLC)> <Ethernet type>
Configures the frame type and the Ethernet type for the selected protocol. Ethernet type consists of
a 4-digit (16 bit) hex code, such as 0080 (IPv4).
prio <0-7>
Configures the priority value for this PVLAN.
add
Adds a port to the selected PVLAN.
rem
Removes a port from the selected PVLAN.
del
Deletes the selected protocol configuration from the VLAN.
ports
Defines a list of ports that belong to the selected protocol on this VLAN. Enter 0 (zero) to remove
all ports.
tagpvl enable|disable
Enables or disables port tagging on this PVLAN.
taglist
Defines a list of ports that will be tagged by the selected protocol on this VLAN. Enter empty to
disable tagging on all ports by this PVLAN.