Nortel Networks ALTEON OS BMD00007 - Manual (Page 359)

Alteon OS Command Reference
The Maintenance Menu „ 361 BMD00007, November 2007
/maint/ptdmp <server> <filename>
TFTP System Dump Put
Use this command to put (save) the system dump to a TFTP server.
N OTE – If the TFTP server is running SunOS or the Solaris operating system, the specified
ptdmp file must exist prior to executing the ptdmp command, and must be writable (set with
proper permission, and not locked by any application). The contents of the specified file will
be replaced with the current dump data.
To save dump information via TFTP, at the Maintenance# prompt, enter:
Where server is the TFTP server IP address or hostname, and filename is the target dump file.
/maint/cldmp
Clearing Dump Information
To clear dump information from flash memory, at the Maintenance# prompt, enter:
The switch clears the dump region of flash memory and displays the following message:
If the flash dump region is already clear, the switch displays the following message:
Maintenance# ptdmp <server> <filename>
Maintenance# cldmp
FLASH dump region cleared.
FLASH dump region is already clear.