Nortel Networks ALTEON OS BMD00007 - Manual (Page 214)

Alteon OS Command Reference
216 „ The Configuration Menu BMD00007, November 2007
Temporarily Disabling a Port
To temporarily disable a port without changing its stored configuration attributes, enter the fol-
lowing command at any prompt:
Because this configuration sets a temporary state for the port, you do not need to use apply or
save . The port state will revert to its original configuration when the GbE Switch Module is
reset. See the “Operations Menu” on page 330 for other operations-level commands.
/cfg/port <port alias or number> aclqos
Port ACL Configuration
cur
Displays current port parameters.
Main# /oper/port <port alias or number>/dis
[Port INT2 ACL Menu]
add - Add ACL or ACL group to this port
rem - Remove ACL or ACL group from this port
cur - Display current ACLs for this port
Table 6-27 Port ACL Menu Options (/cfg/port/aclqos)
Command Syntax and Usage
add acl|grp <ACL number or Group number, 1-896>
Adds the specified ACL or ACL Group to the port. You can add multiple ACL Groups to a port,
but the total number of precedence levels allowed is eight.
rem <ACL number, 1-896>
Removes the specified ACL or ACL Group from the port.
cur
Displays current ACL QoS parameters.
Table 6-26 Port Link Configuration Menu Options (/cfg/port/gig)
Command Syntax and Usage