Nortel Networks ALTEON OS BMD00007 User Manual
Page 192
Alteon OS Command Reference
194
The Configuration Menu
BMD00007, November 2007
Table 6-9 System SNMP Menu Options (/cfg/sys/ssnmp)
Command Syntax and Usage
snmpv3
Displays SNMPv3 menu. To view menu options, see
.
name
<new string, maximum 64 characters>
Configures the name for the system. The name can have a maximum of 64 characters.
locn
<new string, maximum 64 characters>
Configures the name of the system location. The location can have a maximum of 64 characters.
cont
<new string, maximum 64 characters>
Configures the name of the system contact. The contact can have a maximum of 64 characters.
rcomm
<new SNMP read community string, maximum 32 characters>
Configures the SNMP read community string. The read community string controls SNMP “get”
access to the switch. It can have a maximum of 32 characters. The default read community string is
public.
wcomm
<new SNMP write community string, maximum 32 characters>
Configures the SNMP write community string. The write community string controls SNMP “set”
and “get” access to the switch. It can have a maximum of 32 characters. The default write commu-
nity string is private.
trsrc
<1-128>
Configures the source interface for SNMP traps.
timeout
<1-30>
Set the timeout value for the SNMP state machine, in minutes.
auth disable|enable
Enables or disables the use of the system authentication trap facility. The default setting is dis-
abled.
linkt
<port> [disable|enable]
Enables or disables the sending of SNMP link up and link down traps. The default setting is
enabled.
cur
Displays the current SNMP configuration.