Nortel Networks ALTEON OS BMD00007 - Manual (Page 250)

Alteon OS Command Reference
252 „ The Configuration Menu BMD00007, November 2007
/cfg/l2/vlan/privlan
Private VLAN Configuration
Use this menu to configure a Private VLAN.
[privlan Menu]
type - Set Private-VLAN type
map - Associate secondary VLAN with a primary VLAN
ena - Enable Private-VLAN
dis - Disable Private-VLAN
cur - Display current Private-VLAN configuration
Table 6-54 Private VLAN Menu Options (/cfg/l2/vlan/privlan)
Command Syntax and Usage
type primary|isolated|community
Defines the VLAN type, as follows:
„ Primary: A Private VLAN must have only one primary VLAN. The primary VLAN carries
unidirectional traffic to ports on the isolated VLAN or to community VLAN.
„ Isolated: The isolated VLAN carries unidirectional traffic from host ports. A Private VLAN
may have only one isolated VLAN.
„ Community: Community VLANs carry upstream traffic from host ports. A Private VLAN may
have multiple community VLANs.
map <2-4094>
Configures Private VLAN mapping between a secondary VLAN (isolated or community)
and a primary VLAN. Enter the primary VLAN ID.
ena
Enables the Private VLAN.
dis
Disables the Private VLAN.
cur
Displays current parameters for the selected Private VLAN.