Nortel Networks ALTEON OS BMD00007 - Manual (Page 35)

Alteon OS Command Reference
First-Time Configuration „ 35 BMD00007, November 2007
N OTE – When the GbE Switch Module is reset, the date and time to revert to default values.
Use /cfg/sys/date and /cfg/sys/time to re-enter the current date and time.
The system displays the date and time settings:
3. Enter the month of the current system date at the prompt:
Enter the month as a number from 1 to 12. To keep the current month, press <Enter>.
4. Enter the day of the current date at the prompt:
Enter the date as a number from 1 to 31. To keep the current day, press <Enter>.
5. Enter the hour of the current system time at the prompt:
Enter the hour as a number from 00 to 23. To keep the current hour, press <Enter>.
6. Enter the minute of the current time at the prompt:
Enter the minute as a number from 00 to 59. To keep the current minute, press <Enter>.
7. Enter the seconds of the current time at the prompt:
Enter the seconds as a number from 00 to 59. To keep the current second, press <Enter>.
The system displays the date and time settings:
System clock set to 18:55:36 Wed Jan 3, 2007.
System Date:
Enter month [1]:
Enter day [3]:
System Time:
Enter hour in 24-hour format [18]:
Enter minutes [55]:
Enter seconds [37]:
System clock set to 8:55:36 Wed Jan 3, 2007.