Nortel Networks ALTEON OS BMD00007 - Manual (Page 275)

Alteon OS Command Reference
The Configuration Menu „ 277 BMD00007, November 2007
/cfg/l3/ospf/virt <link number>
OSPF Virtual Link Configuration
[OSPF Virtual Link 1 Menu]
aindex - Set area index
hello - Set hello interval in seconds
dead - Set dead interval in seconds
trans - Set transit delay in seconds
retra - Set retransmit interval in seconds
nbr - Set router ID of virtual neighbor
key - Set authentication key
mdkey - Set MD5 key ID
enable - Enable interface
disable - Disable interface
delete - Delete interface
cur - Display current OSPF interface configuration
Table 6-73 OSPF Virtual Link Configuration Menu Options (/cfg/l3/ospf/virt)
Command Syntax and Usage
aindex <area index (0-2)>
Configures the OSPF area index.
hello <value (1-65535)>
Configures the authentication parameters of a hello packet, in seconds.
dead <value (1-65535)>
Configures the health parameters of a hello packet, in seconds. Default is 60 seconds.
trans <value (1-3600)>
Configures the delay in transit, in seconds. Default is one second.
retra <value (1-3600)>
Configures the retransmit interval, in seconds. Default is five seconds.
nbr <NBR router ID (IP address)>
Configures the router ID of the virtual neighbor. Default is 0.0.0.0.
key <password>
Configures the password (up to eight characters) for each virtual link. Default is none.
mdkey <key ID (1-255)>|none
Sets MD5 key ID for each virtual link. Default is none.
enable
Enables OSPF virtual link.