Nortel Networks ALTEON OS BMD00007 - Manual (Page 361)

BMD00007, November 2007 363
A
PPENDIX
A
Alteon OS Syslog Messages
The following syntax is used when outputting syslog messages:
<Time stamp><Log Label>Web OS<Thread ID>:<Message>
where
„ <Timestamp>
The time of the message event is displayed in month day hour:minute:second format. For
example: Aug 19 14:20:30
„ <Log Label>
The following types of log messages are recorded: LOG_EMERG, LOG_ALERT,
LOG_CRIT , LOG_ERR, LOG_WARNING, LOG_NOTICE, LOG_INFO, and LOG_DEBUG
„
<Thread ID>
This is the software thread that reports the log message. The following thread IDs are
recorded: stg, ip, console, telnet, vrrp, system, web server, ssh, and bgp
„ <Message>: The log message
Following is a list of potential syslog messages. To keep this list as short as possible, only
<Thread ID> and <Message> are shown. The messages are sorted by <Log Label>.
Where the <Thread ID> is listed as mgmt, one of the following may be shown: console,
telnet , web server, or ssh.
LOG_WARNING
FILTER “filter <filter number> fired on port <port number>, <source IP address> -> <desti-
nation IP address>, [<ICMP type>], [<IP protocol>], [<TCP f1ags>]”