Log_error – Nortel Networks ALTEON OS BMD00007 User Manual
Page 364

Alteon OS Command Reference
366
Alteon OS Syslog Messages
BMD00007, November 2007
LOG_ERROR
MGMT
PANIC at <file>:<line> in thread <thread id>
MGMT
VERIFY at <file>:<line> in thread <thread id>
MGMT
ASSERT at <file>:<line> in thread <thread id>
NTP
Cannot contact <primary|secondary> NTP server <ip_address>
NTP
Unable to listen to NTP port
STP
Error: Error writing STG config to FLASH
STP
Error: Error writing config to FLASH
MGMT
Apply not done
MGMT
Save not done
MGMT
<apply|save|diff> is issued by another user. Try later.
CLI
Error: Error writing %s config to FLASH
CLI
New Path Cost for Port <port_id> is invalid
CLI
PVID <vlan_id> for port <port_id> is not created
CLI
RADIUS secret must be 1-32 characters long
CLI
Please configure primary RADIUS server address
CLI
STP changes can't be applied since STP is OFF
CLI
Trunk group <trunk_id> contains ports with different PVIDs
CLI
Trunk group <trunk_id> has more than <max_trunk_ports> ports
CLI
Trunk group <trunk_id> contains no ports but is enabled
CLI
Not all ports in trunk group <trunk_id> are in VLAN <vlan_id>
CLI
Trunk groups <trunk_id> and <trunk_id> can not share the same port