Nortel Networks Enterprise Edge Feature Programming Telephone - Manual (Page 100)

100 User preferences
Enterprise Edge Feature Programming Telephone Guide P0908510 Issue 01
Changing User Speed Dial
1. Select User Speed Dial. The display shows the speed dial codes that are
currently programmed.
2. Enter a new speed dial and press Return.
Use the line pool code to select a particular line pool for use with Speed Dial. If you
select Use routing tbl, a line or pool is chosen by the routing programming
according to the initial digits in the number.
The route you choose for a User Speed Dial code must be one that the telephone can
use. For example, if the telephone does not have access to Line Pool B and you use
that pool code with the speed dial code, the code does not work.
To change a system speed dial code, see Changing and adding System Speed Dials
on page 54.
Changing Call Log options
1. Select Call log opt’ns.
2. Choose the option you want to use. See Call Log options on page 84.
Changing how calls are dialed
1. Select Dialing options.
2. Select the option you want to use.
Descriptions for dialing options are found on the Telephone Feature Card, or see
Changing how you dial your calls on page 48.
Changing the language used on the display
Select Language. Choose the language setting: English, French, or Spanish. See
Changing the language on the display on page 90.
Making the display lighter or darker
Select Display contrast and choose the value you want to use.
Changing the telephone’s ring
Select Ring type and choose the option you want to use.
Descriptions for ringing options are found on the Telephone Feature Card or in
Changing the type of ring on page 96.