Nortel Networks Enterprise Edge Feature Programming Telephone - Manual (Page 53)

Time savers for making calls 53
P0908510 Issue 01 Enterprise Edge Feature Programming Telephone Guide
Last Number Redial records a maximum of 24 digits.
Preventing a telephone from using Last Number Redial
Last Number Redial can be restricted at individual telephones.
You need to start a Unified Manager session to program this feature. See
Understanding programming on page 13 for more information.
1. Select Terminals & Sets.
2. Select a DN number.
3. Choose Restrictions.
4. Double-click Set restrictions.
5. Choose an Allow last number setting: Yes or No.
Displays
Using Speed Dial
Enterprise Edge provides two types of speed dialing: system and personal. System
Speed Dial programming allows you to assign two-digit speed dial codes to the
external numbers your co-workers call most frequently. Personal or User Speed
Dial programming allows individuals to program their own speed dial numbers.
Speed dial numbers are subject to the same restriction filters as regularly dialed
numbers. Your installer can program system speed dial numbers to bypass dialing
restrictions.
Tip
If you have a programmed Last Number Redial button, you can use Button
Inquiry (ƒ•‚), then press the Last Number Redial button
followed by £) to check the last number before you dial it.
The last number you dialed was a speed dial number
that displayed a name rather than the number. The
number is dialed correctly, but you cannot see it.
You have not dialed an external telephone number
since the last power interruption or system reset.
Tip
You can copy a number onto an autodial button using Last Number Redial.
Hidden number
No last number