Nortel Networks Enterprise Edge Feature Programming Telephone - Manual (Page 21)

Getting Started 21
P0908510 Issue 01 Enterprise Edge Feature Programming Telephone Guide
The M7410 Cordless Telephone (CT)
The M7410 CT allows you to move freely around your workspace and still have full
access to all your Enterprise Edge system features.
The effective operating radio range in your facility will be dependent upon building
construction and the internal layout of the facility. Typically, a dense office
environment will yield an effective operating radio range of 125 to 150 feet.
Operating radio ranges will be enhanced in more open office environments.
Note: Note: Up to 15 M7410 CT users can be accommodated on one Enterprise
Edge system.
The M7410 CT uses advanced digital technology to provide a quality audio path
over a 900 MHz radio link. Establishing calls over a radio link are comparable to
wire line communications but expect small delays when the handset is brought into
service from an on-hook position.
The M7410 CT mixes voice and data communications paths together, making it
very difficult for anyone to tune in and eavesdrop on conversations. The M7410 CT
is equipped with automatic channel scanning capabilities. The M7410 CT
automatically searches for a new channel when interference is detected.
Starting and ending a session
To start a programming session, double-click the Unified Manager icon.
Ending a session
Simply click Close in the browser window.
Record any changes you make in programming. This way if there is a problem with
the system, maintaining a history of the changes you have made facilitates
troubleshooting. Remember to inform people in your office of any changes you
have made that affect them, such as changes to system speed dial codes or changes
to the number of rings before an unanswered telephone is forwarded.