Nortel Networks Enterprise Edge Feature Programming Telephone - Manual (Page 56)

56 Time savers for making calls
Enterprise Edge Feature Programming Telephone Guide P0908510 Issue 01
Dialing a saved number
Press
ƒfl‡
when you are not on a call.
If you have a programmed Saved Number Redial button, you can use Button
Inquiry (
ƒ•‚
) to check the last number before you dial it.
Preventing a telephone from using Saved Number Redial
Saved Number Redial can be restricted at individual telephones.
You need to start a Unified Manager session to program this feature. See A map for
working in programming on page 16 for more information.
1. Select Terminals & Sets.
2. Select a DN number.
3. Choose Restrictions.
4. Double-click Set restrictions.
5. Choose an Allow saved number setting: Yes or No.
Displays
You have saved a speed dial number that displays a
name rather than the number. The number is dialed
correctly, but you cannot see it.
You have tried to save the number of an incoming call.
You can only save numbers that you have dialed
yourself.
Hidden number
No number saved