Nortel Networks Enterprise Edge Feature Programming Telephone - Manual (Page 86)

86 Tracking your incoming calls
Enterprise Edge Feature Programming Telephone Guide P0908510 Issue 01
Creating a password to your Call Log
ƒ•°fi
To access your Call Log through a password:
1. Press
ƒ•°fi
. The displays reads New passwrd: .
2. Enter your four-digit password. The display reads Repeat New: .
3. Re-enter your four-digit password. The display reads Password changed , which
confirms that your password has been assigned.
To enter Call Log using your password:
1. Press ƒ°⁄¤ to enter Call Log. If you have programmed a
password, the display reads Password: .
2. Enter your four-digit password.
If you forget your Call Log password, it can be deleted in programming. See
Clearing a Call Log password on page 121.
Changing your Call Log password
ƒ•°fi
1. Press ƒ•°fi . The display reads Old passwrd: .
2. Enter your old password. The display reads New passwrd: .
3. Enter your new four-digit password. The display reads Repeat New: .
4. Re-enter your password. The display reads Password changed , which confirms
that your password has been changed.
Deleting an assigned password
ƒ•°fi
1. Press
ƒ•°fi
. The display reads Old passwrd: .
2. Enter your old password. The display reads New passwrd: .
3. Press ˙ or OK. The display reads No pswd assigned , which confirms that
your password has been deleted.
Programming a telephone to log calls automatically
Your installer can program each telephone to automatically log calls coming in on
a line.