Nortel Networks Enterprise Edge Feature Programming Telephone - Manual (Page 124)

124 Using System features
Enterprise Edge Feature Programming Telephone Guide P0908510 Issue 01
Partial prevents:
Full, in addition to the restrictions outlined for Partial lock, prevents:
Changing Set Lock programming for a telephone
You need to start a Unified Manager session to program this feature. See Getting
Started on page 13 for more information.
1. Select Terminals & Sets.
2. Select a DN number.
3. Choose Restrictions.
4. Double-click Set restrictions.
5. Choose a Set lock setting: None, Partial, or Full.
Using an auxiliary ringer
An auxiliary ringer is a separate device that has to be connected to Enterprise Edge.
Turning the auxiliary ringer for a telephone on or off
You need to start a Unified Manager session to program this feature. See Getting
Started on page 13 for more information.
1. Select Terminals & Sets.
2. Select a DN number.
3. Double-click Capabilities.
• programming autodial buttons
• programming user speed dial
numbers
• programming feature buttons
• moving line buttons
• changing the display language
• changing dialing modes
(Automatic Dial, Pre-Dial, and
Standard Dial)
• using Voice Call Deny
• saving a number with Saved
Number Redial
• changing Background Music
• changing Privacy
• changing Do Not Disturb
• using Ring Again
• using Call Forward all calls
• using Send Message
• using Trunk Answer
• activating Services