Nortel Networks Enterprise Edge Feature Programming Telephone - Manual (Page 54)

54 Time savers for making calls
Enterprise Edge Feature Programming Telephone Guide P0908510 Issue 01
Speed dial numbers may include host system signaling codes.
Making a speed dial call
ƒ‚
1. Press
ƒ‚
to quickly dial external telephone numbers that have been
programmed onto speed dial codes.
2. Enter the appropriate two-digit speed dial code.
Changing and adding System Speed Dials
System Speed Dial codes are numbered from 01 to 70. The system administrator
assigns numbers to System Speed Dial codes for the entire system. See
Adding or
changing a system speed dial on page 23.
Adding or changing User Speed Dial
ƒ•›
To add or change a User Speed Dial number on your telephone:
1. Press
ƒ•›
.
2. Enter a two-digit code from 71 to 94 that you want to associate with a
telephone number.
3. To include a line selection for this number, press the line or intercom button.
To select a line pool, press a programmed line pool button, or press
∆
and enter a line pool access code. For the M7100 telephone, you can select
only a line pool.
4. Enter the number you want to program.
5. Press
˙ or OK .
Tip
There is no difference between using User Speed Dial and using System
Speed Dial. They differ only in how you program them.