Nortel Networks Enterprise Edge Feature Programming Telephone - Manual (Page 14)

14 Getting Started
Enterprise Edge Feature Programming Telephone Guide P0908510 Issue 01
• Personal programming is available to anyone through the Feature button on
their Enterprise Edge telephone. It allows individuals to change how their
telephone works to suit themselves.
Before you start
Before you begin programming, plan what changes you want to make. Record the
changes so that you have the information at hand. For example, if you are going to
program system speed dial numbers, create a record so that you have all the
numbers and codes handy once you start programming.
What you’ll need to do programming
Personal programming is done right on your telephone by pressing the ƒ
button followed by an activation code. For your convenience, a summary of all the
Feature button programming is provided in Appendix A.
Administrative programming is done using the Unified Manager. The Unified
Manager is the tool used to program settings for the Enterprise Edge telephony
features, as well as settings for individual telephones and external lines. Multiple
levels of programming are accessible through the Unified Manager. You access the
Enterprise Edge Unified Manager from your web browser. For more information
about navigation and making selections using the Unified Manager, see the
Enterprise Edge Programming Operations Guide.
Understanding the telephone buttons
Take a few minutes to study the telephone buttons. The M7324 is different from the
M7310 and M7208 in two ways: it does not have dual memory buttons (item 5) or
a shift button (item 6).
Using the buttons under the display
The three display buttons are used for telephone features but what each button does
depends on what the display shows. Some display instructions that you may see
when making changes on the system are OK, CHANGE or COPY. In this guide, display
button instructions are underlined.