Nortel Networks Enterprise Edge Feature Programming Telephone User Manual
Page 71
Forwarding your calls 71
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Displays while canceling redirection
How Line Redirection is different from Call Forward
Call Forward forwards all calls that arrive at a particular telephone to an internal or
external telephone. Line Redirection redirects only the lines you specify, no matter
which telephones they appear on, to a telephone outside the Enterprise Edge
system. Line Redirection takes precedence over Call Forward.
Select the line that is used to redirect calls out of the
system.
Press the lines to be redirected. To undo a line
selection, press it again. Press
ALL
to redirect all your
lines.
Continue to press the lines to be redirected. Press
˙
or
OK
when you are finished.
The line you are attempting to redirect cannot be
redirected because the hardware does not support
redirection.
Press the lines that are no longer to be redirected. The
lines light up as you press them. Once you cancel
redirection for a line you cannot restore it by pressing
the line again. Press
ALL
to cancel redirection for all
your lines. When you are finished, press
˙
or
OK
.
Continue to press the lines that are no longer to be
redirected. Press
˙
or
OK
when you are
finished.
For other displays, see
Select line out
QUIT
Select line(s)
QUIT
ALL
Select line(s)
ALL
OK
Unequipped line
Select line(s)
QUIT
ALL
Select line(s)
ALL
OK