Nortel Networks Enterprise Edge Feature Programming Telephone - Manual (Page 136)

136 Companion Features
Enterprise Edge Feature Programming Telephone Guide P0908510 Issue 01
Record the password in the Programming Record.
Portable telephone programming
You need to start a Unified Manager session to program portable telephone settings.
Select Resources, Telephony, Companion to program these settings.
Registration
You must enable registration for the entire Enterprise Edge system to allow
registration of individual portables. The options are Yes (Y) and No (N). Yes
indicates that Registration is enabled. No is the default and indicates that
Registration is not enabled.
To enable user registration:
1. Select Telephony, Companion.
2. Double-click Registration.
3. Select a Registration enabled option: Y (Yes) or N (No).
Portable DNs
Once registration is enabled for your Enterprise Edge system, a series of extension
numbers (469 to 500) automatically becomes available for registration. Check that
an extension number is available before registering a portable telephone to it.
If the extension number shows a status of Available, it is ready for registering a
portable telephone.
Tip
You can choose any combination of one to six digits. It is easier to remember
the password if the digits spell a word. Provide this password only to selected
personnel to prevent unauthorized access to programming. The implications of
such access may include the rearrangement of line assignments, which could
affect the operation of the Enterprise Edge system.
Software Keys are required to activate wireless capabilities for the
Companion C3050 Etiquette and Companion C3050 CT2Plus
To take advantage of the wireless capabilities available to your Enterprise
Edge system, you must first enable a certain number of portable credits using
Software Keys purchased through Nortel Networks. For more detailed
information on enabling Enterprise Edge, see the Enterprise Edge
Programming Operations Guide.
Registration should normally be disabled.
For security reasons, and to prevent unauthorized users from being registered
to your system, set registration to N when you have finished registering the
portables.