Nortel Networks Enterprise Edge Feature Programming Telephone - Manual (Page 24)

24 Frequent programming operations
Enterprise Edge Feature Programming Telephone Guide P0908510 Issue 01
1. Select System Speed dial.
2. Select the two-digit speed dial code (01 to 70).
3. Type in the telephone number (up to 24 digits) you wish to save as a speed
dial and press Return.
If this is a new speed dial, more fields appear after you press Return.
4. Choose a Facility setting: Use prime line, line:nnn, Pool code:xx, or Use
routing table.
where
nnn is an integer between 001 and 238
xx is a letter between A and O
5. Choose a Display digits setting: Y (Yes) or N (No).
If you choose not to display the digits, the name of the Speed Dial code is
displayed instead of the phone number.
6. Choose a Bypass restrictions setting: Y (Yes) or N (No).
Note: If you assign a specific line to a system speed dial number, only telephones
with an appearance of that line can use the speed dial number.
Changing the name of a telephone
You can add a name to a telephone to further identify the
set within your network. For example, in addition to the
extension number, you might want to add an abbreviated
name of the user (for example, Jean B).
1. Select Terminals & Sets.
2. Select the DN number.
3. Double-click Name.
4. Type in a new name (up to 7 characters including spaces) and press Return.
Name
Terminals & Sets