National Instruments Graphical User Interface Ultiboard - Manual (Page 46)

Chapter 1 User Interface
NI Ultiboard User Manual 1-30 ni.com
Note You can also access the above commands from a pop-up menu by right-clicking in
the Spreadsheet View.
Spreadsheet View: DRC Tab
The DRC tab displays errors (for example, Design Rule Errors) and
warnings as they occur while you work. Errors are labeled with red
triangles, and warnings are labeled with yellow circles, as shown in the
example in the figure below.
Double-click on an error or warning to go to its location on the workspace.
Find and Select the Part button. Zooms in on the
selected part. Refer to the
Using the Parts Tab for Other
Functions section of Chapter 4, Working with Parts , for
more information.
Lock the Selected Part button. Locks the selected
unlocked parts or unlocks the selected locked parts. Refer
to the
Using the Parts Tab for Other Functions section of
Chapter 4, Working with Parts , for more information.
Start Placing the Unpositioned Parts button. Refer to
the
Using the Parts Tab to Place Parts section of
Chapter 4, Working with Parts , for more information.
Show preview button. Toggles the Spreadsheet View’s
Preview function on and off. Refer to the
Using the Parts
Tab for Other Functions section of Chapter 4, Working
with Parts , for more information.
Button Description