National Instruments Graphical User Interface Ultiboard - Manual (Page 47)

Chapter 1 User Interface
© National Instruments Corporation 1-31 NI Ultiboard User Manual
When you right-click on an item in the DRC tab, a pop-up menu displays
with the following available selections:
• Copy—Copies all items in the DRC tab and places them on the
clipboard.
• Go to Error/Tag—Click to go to the highlighted error or warning on
the workspace.
• Add to Filter—Click to filter out the selected error/warning type. This
type of error/warning will no longer show in the DRC tab.
• Remove all filters—Click to remove all error/warning types from the
filter. All errors and warnings will now show in the DRC tab.
• Start Filter Manager—Click to start the Filter Manager. Refer to the
Filter Manager section for more information.
Filter Manager
Use the Filter Manager to filter desired errors & warnings out of the DRC
tab in the Spreadsheet View.
Complete the following steps to use the Filter Manager:
1. Right-click in the DRC tab of the Spreadsheet View and select Start
filter manager from the pop-up that appears.
The Filter Manager dialog box appears with a list of errors and
warnings that are filtered out of the DRC tab. If this is the first time
you are accessing this dialog box, it will be empty.
2. Click Add Filter to display the Add Filter(s) dialog box.