National Instruments Graphical User Interface Ultiboard - Manual (Page 71)

Chapter 2 Beginning a Design
NI Ultiboard User Manual 2-6 ni.com
To save all open file and designs, choose File»Save All.
To close the current file and its designs, choose File»Close. If you have any
unsaved changes in the file or designs, you are prompted to save the file
and/or designs.
To close all open projects and designs, choose File»Close All. If you have
any unsaved changes in the projects or designs, you are prompted to save
the projects and/or designs.
Saving Technology Specifications from a Design
You can save the technology specifications from the current design into a
technology file. This technology file can be used to import technology
settings into another design.
Complete the following steps to save a design’s technology specifications:
1. Have the desired design open in Ultiboard.
2. Select File»Save Technology. The Technology File Settings dialog
box appears.
3. Select the technology parameters you want to save and click OK.
A standard Windows Save dialog appears. Select the desired location
for the technology file, enter its name in the File name field and click
Save.
Loading Technology Files
You can load technology specifications from a technology file that you
saved earlier. Refer to the Saving Technology Specifications from a Design
section for more information.
Complete the following steps to load technology into the active file:
1. Select File»Load Technology. A standard Windows Open dialog
appears.
2. Navigate to the desired folder, highlight the desired technology file and
click Open. The Technology Import dialog displays.
3. Select the desired items to load into your open design file and click
OK.