Spreadsheet view: smt pads tab, Spreadsheet view: smt pads tab -39 – National Instruments Graphical User Interface Ultiboard User Manual
Page 55
Chapter 1
User Interface
© National Instruments Corporation
1-39
Spreadsheet View: SMT Pads Tab
Use the SMT Pads
tab to work with pad information for surface-mount
devices.
Routing
Priority
The routing priority for the selected net group. 1 is the
highest priority, 2 the second highest, etc. Leave as
None if priority routing is not required. This feature is
not available in all versions of Ultiboard.
Locked
Yes indicates that the part cannot be moved. No
indicates that the part can be moved.
Max Via
Count
This is the maximum number of vias allowed in the
net group.
Column
Description
Pad Name
The unique identifier for the pad, by RefDes and Pin
Number. For example, U1, P1 is pin number one of
the device with RefDes U1.
Pad Shape
The shape of the pad as set in the SMT Pin
Properties dialog box. Refer to the
section of Chapter 4,
, for more information.
Pad Radius
The radius of the pad as set in the SMT Pin
Properties dialog box. Refer to the
section of Chapter 4,
, for more information.
Pad Width
The width of the pad as set in the SMT Pin
Properties dialog box. Refer to the
section of Chapter 4,
, for more information.
Pad Height
The height of the pad as set in the SMT Pin
Properties dialog box. Refer to the
section of Chapter 4,
, for more information.
Column
Description