Working with differential pairs, Working with differential pairs -17 – National Instruments Graphical User Interface Ultiboard User Manual
Page 93
Chapter 3
Setting Up a Design
© National Instruments Corporation
3-17
Working with Differential Pairs
Complete the following steps to create a differential pair:
1.
Select Tools»Group Editor to display the Edit Groups dialog box.
2.
Click the Differential Pairs tab.
3.
Click Add. The Add group dialog box appears.
4.
Enter the desired name and click OK. The Change group settings
dialog box appears.
5.
Change the settings in the Group Settings area as desired.
Note
Refer to the
Change Group Settings dialog box
sections for more information.
6.
Click OK to return to the Differential Pairs tab. The newly created
group (differential pair) appears in the Groups list.
7.
Highlight the new group to display a list of nets you can add to the
group in the Assign Nets list, as shown in the example below.