Nortel Networks NN46110-602 - Manual (Page 112)

112 Chapter 5 Packet capture
NN46110-602
6 Enter the administrator’s user name and password.
Please enter the administrator's user name: admin
Please enter the administrator's password: *****
The serial main menu appears.
Main Menu: System is currently in NORMAL mode.
1) Interfaces
2) Administrator
3) Default Private Route Menu
4) Default Public Route Menu
5) Create A User Control Tunnel(IPsec) Profile
6) Restricted Management Mode FALSE
7) Allow HTTP Management TRUE
8) Firewall Options
9) Shutdown
B) System Boot Options
P) Configure Serial Port
C) Controlled Crash
L) Command Line Interface
R) Reset System to Factory Defaults
E) Exit, Save and Invoke Changes
Please select a menu choice (1 - 9,B,P,C,L,R,E): L
7 Access the command line interface by typing the letter L (uppercase or
lowercase) at the prompt.
The User EXEC prompt appears:
CES>
8 Enter Privileged EXEC mode.
CES> enable
Password:*****
9 Enable packet capture globally on the VPN Router and create the capture
password. Use this password to open capture files with the
openpcap utility.
Enter at least eight characters for the capture password and include at least
one number.
CES #capture enable
Please specify password for encrypting capture files.
Password: ********
Reenter password: ********