Nortel Networks NN46110-602 - Manual (Page 186)

186 Appendix C System messages
NN46110-602
Session: xxx[xxx]:xxx xxx auth method not allowed
Description: The authentication method of the incoming request is not allowed in
the group that the session is bound to. The session is bound to a group by one of
the following:
• the group that the user’s account is in (in LDAP)
• RADIUS default group
• RADIUS class attribute
• CA authentication server's default group
Action: Enable the authentication method for the bound group.
Session:
xxx[xxx]:xxx—authentication failed using all
authservers
Description: The incoming request cannot be authenticated by any configured
authentication servers (LDAP, RADIUS, or CA).
Action: Provide the correct credentials. For example, create a new user account.
Session:
xxx[xxx]:xxx AddLink failed [xxx] current links xxx
Description: The multilink session cannot be created. This is caused by any of the
following:
• New logins are disabled.
• The max sessions on the VPN Router is reached.
• There is not enough heap on the VPN Router.
• The call admission priority slot is full.
• The call admission priority slot is outside of access hours.
• The max links configured for the group is reached.
Action: Verify the correct settings for each of the possible causes.