Nortel Networks NN46110-602 - Manual (Page 188)

188 Appendix C System messages
NN46110-602
Session:
xxx[xxx]:xxx account not allowed now
Description: The session request is outside the permitted hours of access.
Action: Change the Access Hours setting assigned to the group on the Profiles
>
Groups
> Edit > Connectivity window.
Session:
xxx[xxx]:xxx authentication failed using xxx
Description: The credentials for the session cannot be validated by any of the
authentication servers.
Action:
1 Make sure you are using the correct credentials.
2 Expand the capability of the RADIUS authentication server to handle the
authentication method.
3 Add a new account with the given credentials.
Session:
xxx[xxx]:xxx client assigned address [xxx] already in
use
Description: The address given by the tunnel client is currently is use. This
indicates that the address is either being used in a static or dynamic route, or that
the address is assigned to an active tunnel.
Action: Configure the client to use a different address.
Session:
xxx[xxx]:xxx connect Qos level xxx full
Description: The VPN Router does not have any more slots for the session's call
admission priority. This indicates that the configured Call Admission Priority for
the group that the request is assigned to is too low.
Action: Increase the Call Admission Priority on the Profiles
> Groups > Edit >
Connectivity window.