Nortel Networks NN46110-602 - Manual (Page 120)

120 Chapter 5 Packet capture
NN46110-602
In the following example, the show capture command is run with no object
name to display a list of all the capture objects configured on the VPN Router.
CES# show capture
Name Type Size Buffer use Count State
bot1 TUNNEL 1048576 0% 0 EMPTY
ether0 ETHERNET 1048576 7% 984 STOPPED
rawip1 GLOBAL 1048576 0% 0 EMPTY
CES#
The following example shows the type of output you see when you enter the
show
capture
command for a specific capture object.
CES# show capture bot1
Capture state: STOPPED
Capture buffer size: 1048576
Capture type: TUNNEL
Tunnel type to capture: IPSEC
Tunnel encapsulation to capture: INITIATOR
Restarting capture on tunnel logoff: DISABLED
Capturing MAX octets per frame: 4096
Captured frames: 0
Capture buffer utilization: 0%
Capturing direction: BIDIRECTIONAL
Capture buffer wrapping: DISABLED
Capture buffer wrapped: FALSE
Capture filter applied: permit all
Capture filter discards: 0
Start trigger applied: permit all
Start trigger discards: 0
Stop trigger applied: permit all
CES#