Nortel Networks NN46110-602 - Manual (Page 178)

178 Appendix C System messages
NN46110-602
ISAKMP
[13] Invalid ID information in message from xxx
(a.b.c.d)
Description: One side of the connection is configured to support dynamic routing
while the other side is configured for static routing. Branch office is xxx.
Action: Configure both sides to use the same routing type.
Description: Both sides are configured to support static routing, however the
local and remote network definitions of the two sides do not match. Branch office
is xxx.
Action: Configure both sides to have matching local and remote network
definitions.
ISAKMP
[13] Error notification (Invalid ID information) received
from
xxx (a.b.c.d)
Description: One side of the connection is configured to support dynamic routing
while the other side is configured for static routing. Branch office is xxx.
Action: Configure both sides to use the same routing type.
Description: Both sides are configured to support static routing. However, the
local and remote network definitions of the two sides do not match. Branch office
is xxx.
Action: Configure both sides to have matching local and remote network
definitions.
Branch office messages
Couldn't install route for remxxx@xxx
Description: The VPN Router cannot install the route for the remote network
(indicated by remxxx@xxx). This happens when the route collides with an existing
static route.