Nortel Networks NN46110-602 - Manual (Page 25)

25
Nortel VPN Router Troubleshooting
New in this release
The following section details what is new in Nortel VPN Router Troubleshooting
for Release 7.0.
Features
See the following sections for information about feature changes:
• SNMP traps when an IP address pool reaches the configured threshold
• Automatic backups
• PCAP enhancements
• SNMP interface index enhancement
SNMP traps when an IP address pool reaches the
configured threshold
You can configure the VPN Router so that a Simple Network Management
Protocol (SNMP) trap sends a notification about an exhausted pool when a
defined IP address pool reaches a configured limit. The list of IP address pools is
periodically traversed and sends a trap if any pool is over the quota. You can set
the limit and the default is 70%.
For more information about trap notification when the IP pool reaches a certain
capacity, see
“Configuring SNMP traps to send notification when an IP address
pool reaches the configured threshold” on page 32 .