Nortel Networks NN46110-602 - Manual (Page 161)

Appendix A MIB support 161
Nortel VPN Router Troubleshooting
Standard 1.3.6.1.2.1.11.0.5 authenticationFailure n authenticationFailure trap
signifies that the SNMPv2 entity,
acting in an agent role, received a
protocol message that is not
properly authenticated.
The snmpEnableAuthenTraps
object indicates whether this trap
is generated.
snmpAuthenOperation-ces
identifies the operation( ie.
GetRequest, GetNextRequest,... )
was attempted.
snmpAuthenIpAddress-ces
identifies the source IP address of
the operation.
snmpAuthenCommString-ces
identifies the community string
used in the operation.
Proprietary 1.3.6.1.4.1.2505.1.14.3.0.1 firewallRuleTriggeredTrap An event sent at the user's request
to signal that a rule is matched.
firewallPolicyType-ces—Policy
type.
firewallRuleType-ces—Type of rule
that triggered this event.
firewallRuleNumber-ces—Number
of the rule that triggered this event.
ifIndex—ifIndex is the index into
the ifTable for port that received
the packet.
ifName-ces—The name of the
interface, same as ifName.
firewallSrcAddr-ces—Source IP
address of the packet.
firewallSrcPort-ces—Source port
address of the packet.
firewallDestAddr-ces—Destination
IP address of the packet.
firewallDestPort-ces—Destination
port of the packet.
firewallProtocolID-ces—The value
of the protocol field in the IP
header.
firewallRuleAction-ces—Action
defined for the triggered rule.
Table 4 VPN Router traps MIB descriptions