Nortel Networks NN46110-602 User Manual
Page 215
Appendix D Configuring for interoperability 215
Nortel VPN Router Troubleshooting
•
Authentication Method: Pre-Shared key
•
Encrypt Alg: DES
•
Hash Alg: MD5
•
SA Life: Seconds and 3000 (Seconds)
•
Key Group: Diffie-Hellman Group 1
13 On the Key Exchange (Phase 2), Proposal 1 window, enable the following:
•
Encapsulation Protocol (ESP)
•
Encrypt Alg: DES
•
Hash Alg: MD5
•
Encapsulation: Tunnel
•
SA Life: Seconds and 3000 (Seconds)
Configuring the VPN Router for IRE interoperability
To configure the VPN Router for IRE interoperability:
1
Go to Profiles
> Networks and click Edit.
2
Create the network object used for local accessible networks:
3
In the Networks Edit window, enter the IP address for the new subnet; for
example, 10.18.0.45.
4
Enter the subnet mask for the new network: 255.255.0.0.
5
Click Add.
The Networks Edit window reappears and shows the newly created subnet in
the Current Subnets list for the named network.
6
Add each local subnet for which you want tunneled connections coming to or
going from the VPN Router to a network profile.
7
On the Profiles
> Branch Office: Edit GROUP window, verify that your
settings are synchronized with the SafeNet client.
8
Create and configure the IPsec Branch Office connection on the VPN Router,
using the network profile you just created for the local accessible network. On
the Profiles
> Branch Office window, enable the IPsec Authentication: Text
Pre-Shared Key option.