Nortel Networks NN46110-602 User Manual
Page 210
210 Appendix D Configuring for interoperability
NN46110-602
dialer-list 1 protocol ipx permit
snmp-server community public RO
line con 0
line aux 0
line vty 0 4
password terminal
login
end
Configuring the VPN Router for Cisco interoperability
To configure the VPN Router for Cisco interoperability:
1
Select to Profiles
> Networks and click Edit.
2
Create any local accessible networks that you want available.
3
Enter the IP address for the new subnet; for example, 10.18.0.45.
4
Enter the subnet mask for the new network.
5
Click Add.
The Networks Edit window appears and shows the newly created subnet in the
Current Subnets list for the named network.
6
Add each local subnet to a Network profile for which you want tunneled
connections coming to or going from the .
7
On the Profiles
> Branch Office: Edit GROUP window, verify that your
settings are synchronized with the Cisco router .
For Cisco, to turn off Vendor ID and Perfect Forward Secrecy (PFS), go to
the Profiles
> Groups > IPsec: Configure window.
8
Create and configure the IPsec branch office connection on the VPN Router,
using the network profile you just created for the local accessible network.
9
On the Profiles
> Branch Office window, enable IPsec Authentication: Text
Pre-Shared Key.