Original tone sample copy, P.70 “sample copy, Original tone – Ricoh 850 User Manual
Page 118: Sample copy
Copying
70
2
Note
❒ To cancel Auto Start, press the {
Stop
} key.
❒ In Connect Copy mode, press the {
Stop
} key on the master unit to cancel
Auto Start.
Original Tone
The tone sounds and an error message is displayed when you leave your origi-
nal on the exposure glass after copying, and set your originals in the document
feeder after copying.
Note
❒ To stop the Original Tone, see “Original Tone”
Sample Copy
Use this feature to check a copy set before making a long copy run.
Limitation
❒ This function can be used only when the Sort function has been turned on.
Note
❒ This function is only available on the master unit in Connect Copy mode.
A
Select Sort and any other functions, then enter the number of copies to be
made.
B
Set the originals.
C
Press the {
Sample Copy
} key.
One copy is delivered for proof copying.
D
After checking the finish, press the
[Print]
key if the sample is acceptable.
The number of copies mode is the number you specified minus one for the
proof copy.
Note
❒ If you press
[Stop]
after checking change, return to step
A to adjust the copy
settings as necessary. You can change some settings. e.g., staple, punch,
margin adjust settings