Ricoh 850 - Manual (Page 378)

User Tools (Copier/Document Server Features)
330
6
Input/Output
Menu Description
SADF Auto Reset Timer When you set one original at a time in the optional docu-
ment feeder, the Auto Feed indicator lights for a time after
the last original is fed to show that the document feeder is
ready for another original. You can adjust this time from 3
seconds to 99.
Note
❒ Default: 10 seconds
ADF Original Table
Rise Time You can set the document feeder original table rise time.
Note
❒ Default: Original is Set
Face-up/down Eject
From Platen When copying an original placed on the exposure glass or
one original loaded in the document feeder, you can specify
the way copies are delivered.
Note
❒ Default: Face Up
Auto Sort Mode You can specify whether Sort mode is selected when the
machine is turned on or when modes are cleared.
Note
❒ Default: Off
Memory Full Auto Scan
Restart If memory runs out while scanning originals, the machine
can make copies of the scanned originals first, then auto-
matically proceed with scanning the remaining originals.
You can enable or disable this function.
• If you select [On] :
When the memory becomes full, the machine stops al-
lowing you to remove the copy pages delivered on the
output tray.
• If you select [Off] :
You can leave the machine unattended to make all the
copies, but the resulting sorted pages will not be in se-
quence.
Note
❒ Default: Off
Shift Tray You can have copies shifted in sort or stack mode.
Note
❒ Default: Standard