Ricoh 850 - Manual (Page 20)

User Tools (System Settings)
10
1
Settings You can Change with the User
Tools
Reference
Regarding how to access the user tools, see
⇒
P.5 “Accessing User Tools (Sys-
tem Settings)”.
General Features
Menu Description
Function Priority You can specify the mode that is displayed when the opera-
tion switch is turned on or System Reset is activated.
Note
❒ Default: Copier
Reference
See “System Reset”
⇒
P.10 “General Features”.
Panel Tone A tone sounds when a key is pressed. You can turn the tone
on or off . You can also select the volume level from Low,
Medium, and High.
Note
❒ Default: On (volume: Medium)
Ready Panel Tone You can specify whether to sound the tone when the ma-
chine becomes ready for copying after Energy Saver mode
is deactivated or the power is turned on.
Note
❒ When the “Panel Tone” is set to OFF, the tone does not
sound even if the “Ready Panel Tone” is set to ON.
❒ Default: On
Copy Count Display You can set the copy counter to show the number of copies
in the current job made so far (count up) or the number of
copies to be made (count down).
Note
❒ Default: Up (count up)