Ricoh 850 - Manual (Page 226)

Copying
178
2
C Enter the user stamp name with the letter keys on the display panel.
Then press the [#] key.
Note
❒ You can register up to 8 characters.
❒ To change the name entered, press the
[Clear] key and enter new letter.
D Press the
[OK] key.
E Enter the vertical and horizontal size of the stamp with the number keys.
Then press the [#] key.
Note
❒ To change the value entered, press the { Clear } key on the control panel
or [Clear] key on the display and enter the new value.
❒ Maximum User Stamp area: 100 ×
200mm, 3.9"
Ч
7.8".