Ricoh 850 - Manual (Page 477)

Setting Originals
27
2
B
Set the first page of your original face down on the exposure glass and align
it to the rear left corner.
1: Reference mark
2: Scale
C
Lower the document feeder.
Setting Originals in the Document Feeder
Note
❒ The last page should be on the bottom.
❒ Do not stack originals beyond the limit mark on the side fence of the docu-
ment feeder.
❒ When copying thin originals (40 – 52 g/m 2 , 11 – 14 lb, Bond), set one page at
a time in the document feeder or on the exposure glass to avoid damage due
to multi-sheet feeds (several pages fed together at the same time).
❒ Originals in pencil or other similar media may get slightly smudged after be-
ing scanned through the ADF. To avoid this, you can set them on the expo-
sure glass instead.
❒ As a rule, one-sided originals are delivered to the ADF external tray, and two-
sided originals to the ADF tray.
Reference
For originals that the document feeder can handle, see
⇒
P.15 “Originals”.
To set a stack of originals in the document feeder
A
Adjust the guide to the original size.
ND1C01EE
1
2