Ricoh 850 - Manual (Page 528)

Copying
78
2
C
Enter the length of the original with the number keys and press the [#] key.
Note
❒ You can enter sizes within the following ranges:
❒ To change the length entered, press the { Clear } key on the control panel or
[Clear] key on the display and enter the new length.
D
Enter the length of the copy with the number keys and press the [#] key.
Note
❒ To change the length entered, press the { Clear } key on the control panel or
[Clear] key on the display and enter the new length.
❒ To change the length after pressing the [#] key, select [Original] or [Copy] key
and enter the desired length.
E
Set your original, then press the { Start } key.
Metric version 1 - 999 mm (in 1 mm steps)
Inch version 0.1" - 99.9" (in 0.1" steps)