Ricoh 850 - Manual (Page 482)

Copying
32
2
B
Align the rear and left edges of the originals as shown in the illustration.
1: Direction in which to set originals in the ADF.
2: Vertical size
Important
❒ If the originals are of different vertical sizes, put the longer originals on the
bottom otherwise the sizes might not be detected correctly.
C
Adjust the guide to the width of the widest original.
D
Set the aligned originals face up into the document feeder.
Thin Mode
Use Thin mode for copying thin originals from the document feeder.
A
Press the [Thin Paper] key.
Batch (SADF) mode
You can stack up to 100 standard pages in the document feeder. If your original
contains more than 100 pages, use this mode to avoid having to press the {
Start }
key after inserting each batch in the document feeder. Once the first 100 pages
have been scanned in, just set the next batch of pages and they will be scanned
in automatically and copying will continue.
Important
❒ This mode is also useful when copying special originals that need to be
scanned in one page at a time (e.g. translucent paper). Each time you insert a
single page into the document feeder, it will be fed automatically.
B4 A3 1
2
CP19AE