Ricoh 850 User Manual
Page 702
Connect Copy (Option)
252
4
Note
❒ You can enter up to 9999 copies.
❒ If you make a mistake, press the {
Clear
} key and enter a new number.
❒ Even though Connect Copy is selected, only the master unit will make cop-
ies in the following situations :
• When making a single copy set.
• When the original is a single sheet and you enter a low number of cop-
ies/sets.
F
Press the {
Start
} key on the master unit.
Copying starts after the original has been scanned.
Note
❒ If you have set your originals in the document feeder (ADF), copying starts
simultaneously in the master unit and sub-unit after all originals have been
scanned.
❒ When using the Batch (SADF) mode, set your originals and press the
{
Start
} key. After all the previously set originals are scanned in, set the next
originals while the Auto Feed indicator is lit. When all pages have been
scanned in, press the {
#
} key. Copying starts simultaneously in the master
unit and sub-unit. See “Batch SADF mode”.
❒ When scanning from the exposure glass, set the next page(s) when scan-
ning has finished, then press the {
Start
} key. When all pages have been
scanned in, press the {
#
} key. Copying starts simultaneously in the master
unit and sub-unit.
❒ To stop originals being scanned or copied, press the {
Stop
} key on the mas-
ter unit and follow the instructions on the display, press the
[Yes]
key.
G
Pick up your copies from the master unit and sub-unit.
Note
❒ The number of copy sets made by the master unit and sub-unit may differ.
❒ The master unit and sub-unit may not finish copying exactly at the same
time.
❒ When using the Sort/Staple function, copies are organized into copy sets.
If there is a paper misfeed in one machine during this process, it is not pos-
sible for the other machine to take over the copy set processing of the non
functional machine.
❒ When using Document Server functions, only the master unit will make
copies by the combination of the features.